LOW PROFILE SERVO PRESS (DPL)
The Low Profile Press is made for those ‘hard to reach areas’ with a compact design it is optimal for small station footprints robotic applications. The compact design lends itself to robot applications where the COG will minimize inertia to keep robot size smaller. Or for workstations where pressing occurs from below or the side, the station footprint can remain smaller and ergonomic.
| Model | Controller | Rated Max. (kN / lbf) | Continuous (kN / lbf) | Speed (mm/s) | Stroke (mm) | Installation Length* (mm / in) | Weight (kg / lb) | Hanging Weight (kg) | Pull Load (kN) | Available Stroke Options** (mm) | 2-D Print (pdf) | 2-D Drawing (dxf) | 3-D Model (stp) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| DPL-101R3-20FB | MFCT2-S060S | 10 / 2,248 | 2.6 / 585 | 222.2 | 200 |
301 / 11.9
|
19 / 42
|
60 | 3.7 | 100 or 300 | DPL-101R3-20FB.pdf | DPL-101R3-20FB.dxf | DPL-101R3-20FB.stp |
| DPL-301R4J-20FB-CE | MFCT2-S120S | 30 / 6,744 | 10.8 / 2,428 | 250 | 200 |
332 / 13.1
|
35 / 77
|
200 | 4.2 | 100 or 300 | DPL-301R4J-20FB-CE.pdf | DPL-301R4J-20FB-CE.dxf | DPL-301R4J-20FB-CE.stp |
| DPL-501R4J-20FB-CE | MFCT2-S120S | 50 / 11,240 | 13.5 / 3,035 | 200 | 200 |
332 / 13.1
|
49 / 108
|
200 | 9.4 | 100 or 300 | DPL-501R4J-20FB-CE.pdf | DPL-501R4J-20FB-CE.dxf | DPL-501R4J-20FB-CE.stp |
| DPL-102R5-20FB-CE | MFCT2-S120S | 100 / 22,481 | 32 / 7,194 | 133.3 | 200 |
428 / 16.9
|
96 / 212
|
200 | 23.1 | 100 or 300 | DPL-102R5-20FB-CE.pdf | DPL-102R5-20FB-CE.dxf | DPL-102R5-20FB-CE.stp |
| *Installation length is the distance from the mounting flange to the top of the press | |||||||||||||
| **Allowable stroke lengths within the press specifications (Weight and installation length will change based on stroke length). Contact us for additional information. | |||||||||||||
NOT SEEING THE TOOL YOU’RE LOOKING FOR?
Contact MC Fastening Solutions for assistance.